Achieving effective dust control for tailing dams can be real a headache for mine operators. Control measures not only need to be cost-efficient, but operationally effective too.
In this article, we’ll take a look at how to best achieve dust control at tailing dam sites on an ongoing basis.
Tailing dams are designed to permanently hold waste material which is produced during the process of grinding up and separating minerals from ore.
When waste material is pumped into the tailing dam, the solids settle to the bottom and the water on top is re-claimed to be used again.
But once this left-over waste material has dried out, it is of an extremely fine consistency. If left exposed, the material will inevitably be picked up by the wind and turned into dust.
To compound this issue, walls of tailing dams are often raised to keep up with increased mining production. The higher the walls of a tailing dam are raised, the more susceptible the material is to high winds.
A mine site may have plans to rehabilitate a tailing dam with vegetation in the future. Some tailing dams may also contain valuable resources which could be recovered at a later date.
Regardless of future plans, the dust from tailing dams needs to be dealt with in the meantime. This is because:
Managing the dust by covering the tailing dam with gravel or wetting the surface using water are not always practical or cost-efficient solutions, especially over such a large surface area.
Spraying a bonding agent over the dry waste material to form an erosion resistant “crust” is widely considered to be a highly effective and cost-efficient measure for tailing dams.
Recognising the effectiveness of such spay-on measures, Dust-A-Side Australia has developed a concentrated formulation called AquaTarp.
Ideal for use on tailing dams, AquaTarp works to provide enhanced soil binding and dust control properties.
AquaTarp is a solvent-free, water and surfactant based emulsion of latex polymer. Once diluted with water, it can be sprayed on the top layer of a tailing dam prior to the next layer being pumped in.
The presence of acrylic matter in the formulation helps to bind fine dust particles that can quickly become airborne at the slightest breeze.
When sprayed onto dry waste material in tailing dams, the crusting effect of the product produces a surface seal that exhibits extremely good wind and water erosion resistance. It prevents dust particles from being emitted into the atmosphere as well as sediment run-off.
This crust will effectively “lock down” the top surface layer for a period of approximately 6 – 12 months depending on weather conditions and material properties.
The use of AquaTarp is a much more cost-efficient solution compared to repeatedly wetting the surface using water. Water alone can’t form an impenetrable crust and has high operational costs.
AquaTarp can easily be re-applied when the walls of a tailing dam are raised to ensure ongoing dust control.
To learn more about AquaTarp and our other dust control solutions, contact the experts at Dust-A-Side Australia today.
We’ll happily supply you with an obligation-free report to design a dust control system tailored specifically to your needs.
Call us now on 1800 662 387 or simply click here to contact us.